High Nickel Alloys :
Stockist & Producers Of Nickel Alloys Steel
Nickel Alloys Standard UNS Werkstoff Nr.
Nickel 200 N02200 2.4066
Nickel 201 N02201 2.4068
Nickel 200 / 201 :
Nickel 200 is 99.6% tough metals that can be found on the earth's surface. This metal has excellent mechanical properties such as low gas content, high thermal and electrical conductivity. Owing to these properties as well as its chemical composition, Nickel 200 is highly resistant to corrosive environment and corrosion by neutral and alkaline salt solutions. It corrodes at a low rate in neutral and distilled water.

This Nickel 200 is extremely useful in any environment below 600° F. We offer this nickel 200 in various forms like seamless pipe (nickel 200 seamless pipes), welded pipe, seamless tube, fasteners, cap, elbow, erw pipes, reducer, round bar, tee, tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings, flanges and nickel 200 erw pipes.

Our Nickel 200 Sheet, Nickel 200 Plate and nickel 200 products are available in pure (99.2%) wrought nickel with good mechanical properties and resistance to a range of corrosive media.

Wide range of alloy 200 is available in various forms like cap, elbow, erw pipes, fasteners, fittings, flange, plate, reducer, round bar, seamless pipes, sheet, tee and tube.

UNS N02200 is available in Cap, Elbow, ERW Pipes, Fasteners, Fittings, Flange, Plate, Reducer, Round Bar, Seamless Pipes, Sheet, Tee and Tube.

Nickel 201 or Ni 201 is the low-carbon version of Nickel 200. The Nickel 201 has the similar characteristics as the Nickel 200

Chemical Composition :
  Ni Fe C Mn Si Cu Mg Ti S
Nickel 200 99.0 0.40 0.15 0.35 0.10 0.25 - - 0.01
Nickel 201 99.0 0.40 0.02 0.35 0.20 0.25 0.15 0.10 0.01
IMechanical Properties : Hot Rolled Sheets
  Tensile Strength Yield Strength
(0.2% Offset)
Elongation Density Melting Point
Nickel 200 Psi – 67000,
MPa – 462
Psi – 21500,
MPa – 148
45 % 8.9 g/cm3 1446 °C
(2635 °F)
Nickel 201 Psi – 67000,
MPa – 462
Psi – 21500,
MPa – 148
45 % 8.9 g/cm3 1446 °C
(2635 °F)
Specifications :
International
Specifications
Nickel 200
Sheet / Plate
Nickel 200
Round Bar
Nickel
200 Pipe
Nickel
200 Tube
Nickel
200 Fittings
Nickel
200 Forgings
BS 3072, BS 3073, BS 3074, BS 3075, BS 3076, NA11

DIN 17740,17750, 17751,17752, 17753, 17754

Werkstoff Nr. 2.4060, 2.4066

ASME SB-168 ASME SB-160 ASME
SB-161

ASME
SB-829

ASME
SB-775

ASME
SB-725

ASME
SB-161

ASME
SB-163

ASME
SB-730

ASME
SB-751
ASME
SB-366
ASME
SB-564