STOCKIST & PRODUCERS OF NICKEL ALLOYS STEEL
Nickel Alloys Standard UNS Werkstoff Nr.
Nickel 200 N02200 2.4066
Nickel 201 N02201 2.4068
Nickel 200 / 201 :

Monel 400, Nickelvac 400, Nicorros 400

Nickel 200 is 99.6% tough metals that can be found on the earth's surface. This metal has excellent mechanical properties such as low gas content, high thermal and electrical conductivity. Owing to these properties as well as its chemical composition, Nickel 200 is highly resistant to corrosive environment and corrosion by neutral and alkaline salt solutions. It corrodes at a low rate in neutral and distilled water.

This Nickel 200 is extremely useful in any environment below 600° F. We offer this nickel 200 in various forms like seamless pipe (nickel 200 seamless pipes), welded pipe, seamless tube, fasteners, cap, elbow, erw pipes, reducer, round bar, tee, tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings, flanges and nickel 200 erw pipes.

Our Nickel 200 Sheet, Nickel 200 Plate and nickel 200 products are available in pure (99.2%) wrought nickel with good mechanical properties and resistance to a range of corrosive media.

Wide range of alloy 200 is available in various forms like cap, elbow, erw pipes, fasteners, fittings, flange, plate, reducer, round bar, seamless pipes, sheet, tee and tube.

UNS N02200 is available in Cap, Elbow, ERW Pipes, Fasteners, Fittings, Flange, Plate, Reducer, Round Bar, Seamless Pipes, Sheet, Tee and Tube.

Nickel 201 or Ni 201 is the low-carbon version of Nickel 200. The Nickel 201 has the similar characteristics as the Nickel 200

Chemical Composition :
  Ni Fe C Mn Si Cu Mg Ti S
Nickel 200 99.0 0.40 0.15 0.35 0.10 0.25 - - 0.01
Nickel 201 99.0 0.40 0.02 0.35 0.20 0.25 0.15 0.10 0.01
Mechanical Properties : Hot Rolled Sheets
  Tensile Strength Yield Strength
(0.2% Offset)
Elongation Density Melting Point
Nickel 200 Psi – 67000,
MPa – 462
Psi – 21500,
MPa – 148
45 % 8.9 g/cm3 1446 °C
(2635 °F)
Nickel 201 Psi – 67000,
MPa – 462
Psi – 21500,
MPa – 148
45 % 8.9 g/cm3 1446 °C
(2635 °F)
Specifications :
International Specifications Nickel 200 Sheet / Plate Nickel 200 Round Bar Nickel 200 Pipe Nickel 200 Tube Nickel 200 Fittings Nickel 200 Forgings
BS 3072, BS 3073, BS 3074, BS 3075, BS 3076, NA11

DIN 17740,17750, 17751,17752, 17753, 17754.

Werkstoff Nr. 2.4060, 2.4066
ASME SB-168 ASME SB-160 ASME SB-161
ASME SB-829
ASME SB-775
ASME SB-725
ASME SB-161
ASME SB-163
ASME SB-730
ASME SB-751
ASME SB-366 ASME SB-564