STOCKIST & PRODUCERS OF INCONEL 625 STEEL
Nickel Alloys Standard UNS Werkstoff Nr.
INCONEL 625 N06625 2.4856
INCONEL 625 :

Inconel 625, Chronin 625, Altemp 625, Haynes 625, Nickelvac 625, Nicrofer 6020

Inconel ® 625 is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy. It has high strength and toughness in the temperature range cryogenic to 2000°F (1093°C) which is derived largely from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. Alloy 625 has excellent fatigue strength and stress - corrosion cracking resistance to chloride ions.

Typical applications for Alloy 625 have included heat shields, furnace hardware, gas turbine engine ducting, combustion liners, spray bars, chemical plant hardware and special seawater applications. Available forms are wire, Round bar, Forged bar, hex bar, Flat bar, Circles, Ring, Tube, seamless Pipe, Welded/ERW Pipe, Sheet, Plate, Coil, Flanges, fasteners, Socket weld Fittings, ferrule fittings, Buttweld fittings Like cap, elbow, tee, Reducer.

UNS N06625 / Inconel 625 is available in various forms like Inconel 625 wire, Inconel 625 Round bar, Inconel 625 Forged bar, Inconel 625 hex bar, Inconel 625 Flat bar, Inconel 625 Circles, Inconel 625 Ring, Inconel 625 Tube, Inconel 625 seamless Pipe, Inconel 625 Welded/ERW Pipe, Inconel 625 Sheet, Inconel 625 Plate, Inconel 625 Coil, Inconel 625 Flanges, Inconel 625 fasteners, Inconel 625 Socket weld Fittings, Inconel 625 ferrule fittings, Inconel 625 Buttweld fittings Like cap, elbow, tee, Reducer.

Alloy 625 (UNS N06625) is a Nickel-Chromium alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions, used for its high strength, excellent fabricability and outstanding corrosion resistance.

UNS N06625 is available in various forms like cap, elbow, erw pipes, fasteners, fittings, flange, plate, reducer, round bar, seamless pipes, sheet, tee and tube. Alloy 625 (UNS N06625) is a Nickel-Chromium alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions, used for its high strength, excellent fabricability and outstanding corrosion resistance.

Chemical Composition :
  Ni Cr Fe C Mn Si Mo Co Al Ti Nb+Ta P
Inconel 625 58.0 min 20.0–23.0 5.0 max 0.1 max 0.50 max 0.50 max 8.0-10.0 1.0 max 0.40 max 0.40 max 3.15 – 4.15 0.015 max
Mechanical Properties : Hot Rolled Sheets
  Tensile Strength Yield Strength
(0.2% Offset)
Elongation Density Melting Point
Inconel 625 Psi – 135000, MPa – 930 Psi – 75000 , MPa – 517 42.5 % 8.4 g/cm3 1350 °
C (2460 °F)
Specifications :
International Specifications Inconel 625 Sheet / Plate Inconel 625 Round Bar Inconel 625 Pipe Inconel 625 Tube Inconel 625 Fittings Inconel 625 Forgings
BS 3072,
BS 3074,
BS 3076,
NA 21

DIN 17744, 17750, 17751, 17752, 17754.

Werkstoff Nr. 2.4856, AFNOR NC 22 D Nb
ASME SB-443
AMS 5599
AMS 5869
ASME SB-446
AMS 5666
AMS 5837
ASME SB-444
ASME SB-829
ASME SB-775
ASME SB-705
ASME SB-444
ASME SB-829
ASME SB-751
ASME SB-704
AMS 5581
ASME SB- 366 ASME SB- 564
AMS 5666